Function: ●Adjust inner cabinet’s temperature by intelligent control through fan unit.
Degree of protection: ●IP23
Main parameter
S/N
Specification
Parameter
1
Temperature Range
0℃~50℃
2
Input
PTC（10KΩ）
3
Output
2-way output
4
Consumption
3W
5
Power supply
220VAC
6
Accuracy
±1℃
7
Display
2 way 8 section digital pipe, red
8
Ambient temperature
-10℃~70℃
9
Maintain temperature
-20℃~80℃
10
Ambient humidity
≤85％RH
11
Installation
19″standard
Instruction：
I.Connection / wiring
Steps:
1. Connect the temperature sensor to the sensor of temperature controlling unit.
2. Connect the outside fan to the fan plug with special cable.
3. Connect the outside power to the power plug of temperature controlling unit with special cable.
II.Operation
When complete all the connection steps above and confirm the connection is ok, then turn on the switch on the temperature controller and adjust the control parameter to appropriate temperature.
